상품명 | Evolution 402e |
---|---|
판매가 | ₩24,050,000 |
소비자가 | |
제조사 | 크렐 |
적립금 | 2,405원 (0.01%) |
상품요약정보 | - |
사용후기 | 0 |
가격흥정 | 0 |
배송비 | ₩4,000 (₩50,000 이상 구매 시 무료) |
수량 |
(최소주문수량 1개 이상 / 최대주문수량 0개 이하)
사이즈 가이드상품 정보고시 | 상품 정보고시 (소비자보호에 관한 법률에 따름) | ||
---|---|---|---|
품명 및 모델명 | Evolution 402e 스테레오 파워앰프 | 제품 구성 | 본체및 메뉴얼및 부속품 |
품질보증기간 | 구입일로 1년 무상 AS | 동일모델의 출시년월 | 20130801 |
A/S 책입자와 전화번호 | 02-540-7901 | 제조자/수입자 | KRELL/디앤오 |
주문후 예상 배송기간 | 1~3일 | 제조국 | 미국 |
크기 | 하단 스팩 내역 참조 | 상품별 세부사항 | 하단 스팩 내역 참조 |
색상 | 하단 스팩 내역 참조 | 전기안전인증 | ZV09037-13001 |
재질 | 목재 | 기타 | 해당없음 |
Features
The Evolution 402e is the flagship stereo amplifier in the Evolution e Series utilizes the same technological advances as in the larger Evolution monaural amplifiers. The Evolution 402e is an extremely powerful stereo amplifier with the distinct advantage of a smaller footprint. As in its larger siblings, the Evolution 402e combines this power with a modest 2 watt power draw when in standby mode. Perfectly matched with an Evolution 202 preamplifier for stereo application, the Evolution 402e also shines as part of a home theater. In this application, the Evolution 402e gets mated with the Evolution 707 Reference Surround Preamplifier/Processor and an Evolution 403e Three Channel Amplifier for ultimate home theater performance.
Power Supply
The Evolution 402e is equipped with two 2,200 VA transformers and 188,000 μF of capacitance. This power source is the backbone for the output of the Evolution 402e. With this foundation, the Evolution 402e delivers 400 watts into 8 Ohms, 800 watts into 4 Ohms, and 1,600 watts into 2 Ohms with all both channels driven simultaneously. The FTC mandates that power ratings are quoted using a 1,000 Hz sine wave into a fixed 8 Ohm resistor with final power specification stated at 1% distortion. Krell engineering considers this specification too lenient and not indicative of what an amplifier is required to provide. Krell designs to a much stricter standard. Our power tests use a 20-20,000Hz signal into 8, 4, and 2 Ohm loads. Our power tests use a 20-20,000Hz signal into 8, 4, and 2 Ohm loads with our final specifications stated for .1% distortion.
Internal high-current line conditioning circuitry effectively blocks RF noise entering via the AC line and compensates for any asymmetry or DC offset in the power waveforms. The amplifiers' low level and gain stages are powered via multi regulated rails that provide total immunity from supply fluctuations and assure noise-free circuit operation. Primary rail voltages are quasi-regulated, enabling an "on-demand" supply of power that is highly responsive to dynamic load.
Circuitry Highlights
Krell's Active Cascode Topology™ is a significant departure from traditional amplifier circuits where the positive and negative rail voltages are each applied entirely across a single row of transistors. High voltage swing and gain requirements dictate that the transistors be "pushed" into non-linear operating regions and, in some cases, dangerously close to breakdown. Krell topology divides the full voltage swing across multiple rows of transistors, and all devices are active-biased (i.e., they all carry the audio signal). Because individual transistors in the cascode array "see" only a proportional fraction of the rail voltage, they operate in a region that provides optimum linearity, gain, and safety. And because the devices are not being pushed to their limits, the amplifier runs cooler and more reliably. The improved linearity and stability greatly reduces the need for negative feedback, which is known to cause sonic degradation. Krell Evolution power amplifiers use only 14 dB of feedback throughout the topology-a small fraction of the amount implemented in typical designs.
Krell Active Cascode Topology™ offers several performance advantages. It breaks through bandwidth limitations of conventional designs and delivers very high current. The usable bandwidth of an Evolution 402e is 300 kHz; triple the bandwidth of a typical high performance amplifier. The result is near perfect performance in the audible range with no phase anomalies typical of lower bandwidth designs. Because the "work" is spread across multiple devices, the amplifier is more load tolerant. Open-loop output impedance is extremely low-about one hundred times lower than with most power amplifiers-ensuring exceptional speaker control. All of these performance gains are achieved while maintaining a high rail voltage, which provides a beneficial "flywheel" effect-a de facto regulation that enables the amplifier to better deal with sudden changes in power requirement, such as those caused by large signal transients.
Evolution amplifiers feature Krell CAST technology. CAST is a unique circuit and connection breakthrough that eliminates distortions inherent in voltage based amplification. A complete Evolution (source, preamplifier, and amplifier) system, connected with CAST interconnects reduces the number of voltage gain stages to the minimum, one. The resulting noise floor is approaching the theoretical limit of technology. Emanating from a completely black background, music explodes from absolute silence moving the listener closer to the goal of recreating the live musical event in the listening room.
Specfication
Frequency
response
20 Hz to 20 kHz +0, -0.17 dB
<0.5 Hz to 125 kHz +0, -3 dB
Signal-to-noise ratio
>108 dB, wideband,unweighted, referred to full power output
>118 dB, "A"-weighted
Gain
25.4 dB
Total harmonic distortion
<0.02% at 1 kHz, at 400 W, 8 Ohms
<0.15% at 20 kHz, at 400 W, 8 Ohms
Input impedance
Single Ended: 100 kOhms
Balanced: 200 kOhms
CAST: 70 Ohms
Input sensitivity
Single Ended or Balanced: 3.04 V rms
CAST: 3.04 mA rms
Output power
400 W RMS at 8 Ohms both channels driven 800 W RMS at 4 Ohms both channels driven Output voltage
160 V peak-to-peak
57 V RMS
Output current
37 A peak
Slew rate
100 V/μs
Output
Impedance
<0.055 Ohms at 20 Hz
<0.064 Ohms, 20 Hz to 20 kHz
Damping Factor (referred to 8
ohms)
>145 at 20 Hz, referred to 8 Ohms
>125, 20 Hz to 20
kHz, referred to 8 Ohms
Transformers
Two 2200 VA
(4400VA total) for audio circuitry
One 10 VA for digital control circuitry
Power Supply Capacitance
188,000 μF
Power
consumption
Standby: 2 W
(High-current standby: 260W
Idle:
390 W
Maximum: 3800 W
Heat Output
Stand-by: 7
BTU/hr.
(High-current standby: 890 BTU/hr.)
Idle: 1300 BTU/hr.
Maximum:
6400 BTU/hr.
Inputs
2 single-ended via RCA connector
2 balanced via XLR connector
2 CAST via 4-pin bayonet
connector
Outputs
2 pairs Krell binding posts
Dimensions
17.25 in. W x 9.75 in. H x 22.05 in. D
438 mm W x 248 mm H x 560 mm D
Weight
Shipped: 150
lb., 67.9 kg
Unit Only: 135 lb., 61.1 kg
고액결제의 경우 안전을 위해 카드사에서 확인전화를 드릴 수도 있습니다. 확인과정에서 도난 카드의 사용이나 타인 명의의 주문등
정상적인 주문이 아니라고 판단될 경우 임의로 주문을 보류 또는 취소할 수 있습니다.
무통장 입금은 상품 구매 대금은 PC뱅킹, 인터넷뱅킹, 텔레뱅킹 혹은 가까운 은행에서 직접 입금하시면 됩니다.
주문시 입력한 입금자명과 실제입금자의 성명이 반드시 일치하여야 하며, 7일 이내로 입금을 하셔야 하며 입금되지
않은 주문은 자동취소 됩니다.
배송 방법 : 택배
배송 지역 : 전국지역
배송 비용 : ₩4,000
배송 기간 : 1일 ~ 3일
배송 안내 : - 산간벽지나 도서지방은 별도의 추가금액을 지불하셔야 하는 경우가 있습니다.
고객님께서 주문하신 상품은 입금 확인후 배송해 드립니다. 다만, 상품종류에 따라서 상품의 배송이 다소 지연될 수 있습니다.
교환 및 반품이 가능한 경우
- 상품을 공급 받으신 날로부터 7일이내 단, 가전제품의
경우 포장을 개봉하였거나 포장이 훼손되어 상품가치가 상실된 경우에는 교환/반품이 불가능합니다.
- 공급받으신 상품 및 용역의 내용이 표시.광고 내용과
다르거나 다르게 이행된 경우에는 공급받은 날로부터 3월이내, 그사실을 알게 된 날로부터 30일이내
교환 및 반품이 불가능한 경우
- 고객님의 책임 있는 사유로 상품등이 멸실 또는 훼손된 경우. 단, 상품의 내용을 확인하기 위하여
포장 등을 훼손한 경우는 제외
- 포장을 개봉하였거나 포장이 훼손되어 상품가치가 상실된 경우
(예 : 가전제품, 식품, 음반 등, 단 액정화면이 부착된 노트북, LCD모니터, 디지털 카메라 등의 불량화소에
따른 반품/교환은 제조사 기준에 따릅니다.)
- 고객님의 사용 또는 일부 소비에 의하여 상품의 가치가 현저히 감소한 경우 단, 화장품등의 경우 시용제품을
제공한 경우에 한 합니다.
- 시간의 경과에 의하여 재판매가 곤란할 정도로 상품등의 가치가 현저히 감소한 경우
- 복제가 가능한 상품등의 포장을 훼손한 경우
(자세한 내용은 고객만족센터 1:1 E-MAIL상담을 이용해 주시기 바랍니다.)
※ 고객님의 마음이 바뀌어 교환, 반품을 하실 경우 상품반송 비용은 고객님께서 부담하셔야 합니다.
(색상 교환, 사이즈 교환 등 포함)